ULTRA GLOSS PREMIUM TOPSIDE SILICONE MARINE ENAMEL PAINT
SILKY FINISH WHICH IS EASY TO APPLY BY BRUSH, ROLLER OR SPRAY
PERFECT FOR WATERLINE STRIPING
Each gallon of Ultra Gloss Premium silicone marine enamel paint covers approximately 400 square feet per gallon; 2 coats needed for proper application.
Ultra Gloss Premium is a technically advanced, single component silicone copolomer topside finish that delivers a mirror-like finish. Ultra Gloss Premium enamel paint will last up to 10 times longer than conventional topside finishes. It is incredibly durable, very hard, super high gloss, has exceptional color retention, tremendous durability and is loaded with UV protection. Ultra Gloss Premium marine enamel is fast drying and can be sprayed, brushed or rolled giving a silky smooth finish with excellent handle and flow. This widely used silicone copolymer has tremendous resistance to tough chemicals and cleaning solutions. Our marine enamel paint can be used on wood, fiberglass, aluminum and steel.
***20 YEAR WARRANTY***
SUGGESTED USES: Topside, decks, cabin, masts, bilge, waterline, boottop striping, industrial and offshore structures.
LIMITATIONS: Do not apply if material, substrate or ambient temperature is below 50 degrees F or above 95 degrees F.
VEHICLE TYPE: Polyurethane alkyd resin.
SOLVENT TYPE: High flash naphtha.
VOC: 3.76 lbs./ gal. (450 grams/liter).
SOLIDS BY WEIGHT: 50%.
RECOMMENDED DRY FILM: 4.0 mils.
WEIGHT PER GALLON: 10 Lbs. per gallon (varies by color).
VISCOSITY AT 75 DEGREES F (24 DEGREES C): 70-80 KU
AVERAGE DRY TIME AT 75 DEGREES F: Dries to touch in 4 hours. Lower temperatures & higher humidity will slow down dry times.
RECOMMENDED REDUCER: Xylene for spray application, high flash naphtha for brushing or rolling.
RESISTANCE TO: Chemicals resistance, abrasion, oils, grease, rust, corrosion, mildew, chipping and fading.
COVERAGE: Approximate coverage at two mils dry is 400 square feet per gallon, and recommended thickness of 4 mils dry would require 2 full coats. Material losses during mixing and application will vary and must be taken into consideration. Expect less coverage on bare, rough or sandblasted surfaces.
APPLICATION: Brush, spray or roller. Roll: 1/2" nap mohair metal, lambskin, phenolic core roller. Keep roller wet. Roll in one direction, rewet, then cross roll. Spray: Conventional air gravity feed 59-70 PSI, Tip size .055-.070, Airless 2200-2500 PSI, Tip size .013-.017. Product can be reduced with xylene as needed for proper flow out and performance. For air spray reduce 25% with enamel reducer (xylene).
POT LIFE: Not applicable.
SHELF LIFE: Maximum 12 months.
MIXING: Mechanically mix for 10 minutes, making sure that all solid material is mixed thoroughly.
CLEAN UP: Xylene for equipment.
PACKAGE: 1 Gallon can