Item #
5200
Price
$170.95
Sale Price
$129.95
You Save
24%
Options

Super Rust Stop Advanced Silicone Enamel-

Super Rust Stop Advanced Silicone Enamel is an industrial strength 1 part premium silicone metal enamel paint with high solids, designed especially as a heavy duty protective metal coating for exterior and interior applications. Super Rust Stop is designed to withstand heavy use and severe exposure to ultraviolet radiation and inclement weather. Super Rust Stop will protect your metallic surfaces from damaging materials including chemicals, abrasion, oils, grease, corrosion, mildew, chipping and fading. So if you're searching for the perfect, cost-effective, easy to use metal enamel paint, whether it be for your railing, fencing, shed roof, barn roof, or home project, or for a commercial project like a restaurant, retail store, factory or warehouse, then Super Rust Stop is exactly what you need!


***20 YEAR WARRANTY***

* Covers approximately 400 square feet per gallon; 2 coats recommended for proper application.

• Will work on clean steel or rusty steel, galvanized metal, zinc, aluminum, tin or previously painted surfaces.

• Is a technically advanced, single component finish that delivers a mirror-like gloss finish.

• Is loaded with UV stabilizers, will last up to 5 times longer than conventional enamel finishes.

• Can be applied by brush, roller, conventional spray or airless spray.

• Needs no special surface treatment.

• Needs no sanding or deglossing.

• Is extremely durable, hard, super high gloss, exceptional color retention, and tremendous durability.

• Penetrates the porous rust reaching the metal underneath.

• Will not lift, blister, or peel away from its leading edge.

• Is a unique 1-step process.

• Tested scientifically against leading rust/corrosion control products.

• Is fast-drying which when brushed or rolled gives a silky smooth finish with excellent handle and flow.

• Has tremendous resistance to tough chemicals, cleaning solutions and ultraviolet light.

SUGGESTED USES: clean steel, rusty steel, zinc galvanized metal, hot dip zinc galvanized metal, core tan steel, aluminum, tin, previously painted surfaces.

COVERAGE: Theoretical coverage at two mils dry is 400 square feet per gallon, and recommended thickness of 4 mils dry would require 2 full coats. Material losses during mixing and application will vary and must be taken into consideration. Expect less coverage on bare, rough or sand blasted surfaces.

To figure out the amount of paint you will require: Length x Width of surface = square footage x 2 (2 coats) divided by 400 square feet = gallons needed.

LIMITATIONS: Do not apply if material, substrate or ambient temperature is below 40°F or above 95°F.

FINISH: Gloss

RECOMMENDED PRIMER: SUPER RUST STOP PRIMER

VEHICLE TYPE: Silicone Copolymer Resin

SOLVENT TYPE: High Flash Naphtha, Xylene

VOC: 2.9 lbs. / gal (350 grams / liter)

SOLIDS BY WEIGHT: 53%

WEIGHT PER GALLON: 10.2 lbs. per gallon (varies by color)

RECOMMENDED DRY FILM: 4.0 mils

VISCOSITY AT 75°F (24°C): 70-80 KU

AVERAGE DRY TIME - 77°F: Dries to touch in 4 hours. Lower temperatures & higher humidity will slow down dry times.

RECOAT TIMES - 77°F: Recoat in 4-6 hours. Longer times are needed for lower temperatures.

RECOMMENDED REDUCER: Use as packaged. Thinning product may make this product non compliant in your local area.

RESISTANCE TO: Chemical Resistance, Abrasion, Oils, Grease, Rust, Corrosion, Mildew, Chipping and Fading

RECOMMENDED PRIMER: SUPER RUST STOP PRIMER

APPLICATION: Brush, Spray or Roller

ROLL: 3/8” - 1/2” nap mohair metal, lambskin, phenolic core roller. Keep roller wet. Roll in one direction, rewet, then cross roll. Product to be used as packaged. Reducing may make this product non-compliant in your local area.

SPRAY: Conventional Air Gravity Feed 59-70 psi, Tip Size .055-.070, Airless 2200-2500 psi, Tip Size .013-.017.

SURFACE PREPARATION: For optimum performance, scrape off loose rust and paint with a wire brush, and also remove all dirt, oils and grease. Solvent wipe down to remove all residue. Apply topcoat.

POT LIFE: Not Applicable

SHELF LIFE: Minimum 24 months

MIXING: Mix for 10 minutes, making sure that all solid material is mixed thoroughly.

CLEANUP: Xylene or Lacquer Thinner for Equipment

PACKAGE: 1 Gallon cans