Insta-Dry - Fastest Drying Concrete Floor Paint
Developed specifically with ease of application and diversity in mind, Insta-Dry is our fastest drying concrete floor paint. This coating combines a unique blend of solids with quick drying accelerators, making it ideal for use on all types of indoor and outdoor concrete and wood surfaces. Excellent for warehouses, shops and businesses with little or no down time. As our fastest drying garage floor coating available it is also great for residential garages, as well as patios, wood decks, roofs and more.
Insta-Dry utilizes a highly advanced, industrial strength, acrylic resin technology. Designed for maximum protection and ease of application, it is able to resist chemicals, oil and grease and can be used on a variety of substrates. It can be applied directly on bare concrete and wood as well as over previously painted surfaces. It is infused with fast drying accelerators which enable it to cure very quickly when it is applied. A great product for the experienced as well as the inexperienced, this extremely durable concrete and garage floor paint also resists fading, is infused with UV stabilizers and is formulated to last longer than conventional paints.
COVERAGE: Coverage is approximately 300 square feet per gallon. 2 coats are needed for proper application. Material losses during mixing and application will vary and must be taken into consideration. Expect less coverage on rough or porous surfaces.
To figure out the amount of paint you will require: Length x Width of surface = Square Footage x 2 (2 coats) divided by 300 square feet = gallons needed.
• INSTA-DRY is very easy to use, anyone can apply it.
• There is no primer necessary. Insta-Dry is a self priming formulation that forms a strong durable bond on both painted and unpainted surfaces.
• Infused with UV stabilizers for ultimate protection and designed to last longer than conventional paints.
• Great for high traffic areas and heavy use. Ideal for garage floors, wood decks and extra tough commercial applications.
• Protects against chemicals, chipping and cracking.
• Dries very quickly for that extremely fast cure time you are looking for.
• Attractive, durable, slip resistant finish.
• Does not lift, blister or peel away from its leading edge like other paints.
• Can be used indoors or outdoors.
• Industrial strength advanced acrylic resin technology.
• Comes in many assorted colors for you to choose from.
• 10 Year Warranty.
SUGGESTED USES: Interior or exterior concrete or wood surfaces such as garages, shops, warehouses, decks, patios or anywhere a fast drying, commercial strength floor coating is needed.
LIMITATIONS: Do not apply if material, substrate or ambient temperature is below 40 degrees F or above 95 degrees F.
FINISH: Semi Gloss
VEHICLE TYPE: Acrylic resin.
SOLIDS BY WEIGHT: 65%.
AVERAGE DRY TIME AT 75 DEGREES F: Dries to the touch in 3 hours. Second coat can be applied within a minimum of 8 hours with no sanding required. Lower temperatures & higher humidity will slow down dry times.
RECOMMENDED REDUCER: Product is intended to be used as is with no thinning of the material necessary.
RESISTANCE TO: Chemicals, oils, grease, rust, corrosion, mildew, chipping and fading.
SURFACE PREPARATION: Concrete surfaces must be etched with a solution of 50% muriatic acid and 50% water, scrubbing the surface area with a bristle brush or broom. Then rinse with water. Next clean the area with a mixture of TSP powder (Tri-Sodium Phosphate) and water, scrubbing the area using a bristle brush or broom. Rinse with plenty of fresh water and allow the surface to dry for at least 24 hours before applying the material. For wood surfaces, clean the area with a mixture of TSP powder and water using a bristle brush or broom and allow the surface to dry for at least 24 hours before applying the material. Do not use muriatic acid on wood.
APPLICATION: Brush, Spray or Roller (Preferred). Rollers: 1/2" nap lambskin, mohair or phenolic roller. Keep roller wet. Roll in one direction, re-wet, then cross roll. Second coat can be applied after allowing the first coat a minimum of 8 hours to cure.
SPRAY: Conventional air gravity feed 59-70 PSI, Tip size .055-.070, Airless 2200-2500 PSI, Tip size .013-.017
POT LIFE: Not applicable
SHELF LIFE: Minimum 24 Months
MIXING: Mix the paint either mechanically or by hand for at least 10 minutes before using.
CLEAN UP: Water.
PACKAGE: 1 Gallon Can