Epoxy Ultra- Commercial Strength 2 Part Epoxy
EPOXY ULTRA High Build Epoxy Coating creates an incredibly durable epoxy bond strong enough to withstand the demands of high traffic areas as well as extreme weather and moisture conditions. It is perfect for hot and cold climates because it does not crack in the cold or bubble in high heat. Its unique combination of advanced resin technology and high quality raw materials produce unequaled performance – even in the harshest environments. The result is an attractive, highly durable finish, that prolongs the life of a surface for up to 20 years.
EPOXY ULTRA Industrial Strength Epoxy Coating covers approximately 400 square feet per 2 gallon kit; 2 coats needed for proper application
EPOXY ULTRA is a heavy duty residential/industrial strength 2 part epoxy that is a premium high solids coating designed especially as a heavy duty protective coating for exterior and interior applications such as garage floors, roofs, repair shops, warehouses and more . EPOXY ULTRA is designed to withstand high traffic, heavy use and exposure to weather and high UV. EPOXY ULTRA also protects your surface from chemicals, abrasion, oils, grease, corrosion, mildew, chipping and fading. And is excellent on all types of concrete, steel, wood and asphalt. So if your looking for the perfect, cost-effective, easy to use product for your project, whether it be a driveway, garage floor, basement or patio for a home project, or a commercial project like a restaurant, retail store, factory or warehouse, then EPOXY ULTRA is exactly what you need!
DECORATIVE PAINT FLAKE ADDITIVE: Decorative paint flakes can be added to enhance the look of your surface and are very easy to use. Simply broadcast the paint flakes of your choice on top as you are coating your surface. You can use one color or use your own custom blend of colors to achieve the desired results. We recommend that if you are using the decorative paint flake additive, that you also coat over them with our "DIAMOND CLEAR" to trap the flakes between the base coat and the top coat. DIAMOND CLEAR will also increase the durability and shine on your surface for years to come. Take that step up to a whole new level of designer surfaces!
- EXTREMELY DURABLE
- EASY TO USE
- TOUGH AGAINST WEATHERING AND HEAVY USE
- RESISTS CHIPPING, CRACKING, FADING AND PEELING
- ADVANCED EPOXY RESIN TECHNOLOGY INCREASES STRENGTH
- COLORS MAINTAIN THEIR BRILLIANT LOOK FOR MULTIPLE YEARS
- UV PROTECTION FOR ALL SURFACES
- QUICK DRYING TIME
- PROVIDES A MOISTURE PROOF BARRIER
- 20 YEAR WARRANTY
COVERAGE: Approximate coverage at two mils dry is 400 square feet per 2 Gallon Kit, and recommended thickness of 4 mils dry would require 2 full coats. Material losses during mixing and application will vary and must be taken into consideration. Calculate for moderately less coverage on bare, rough or sandblasted surfaces.
To figure out the amount of paint you will require: Length x Width of surface = square footage x 2 (2 coats) divided by 400 square feet = Kits needed.
SUGGESTED USES: Exterior, interior, anywhere a rugged protective coating is needed for your surface.
LIMITATIONS: Do not apply if material, substrate or ambient temperature is below 40 degrees F or above 95 degrees F.
VEHICLE TYPE: Epoxy resin.
SOLIDS BY WEIGHT: 90%.
RECOMMENDED DRY FILM: 20-22 mils. (With 2 Coats)
WEIGHT PER GALLON: Approximately 10 Lbs. per gallon (varies slightly by color).
VISCOSITY AT 75 DEGREES F (24 DEGREES C): 70-80 KU
AVERAGE DRY TIME AT 75 DEGREES F: Dries to touch in 24 hours. Lower temperatures & higher humidity will slow down dry times.
RECOMMENDED REDUCER: If desired material can be thinned using 6-8 ounces of Xylene per 2 gallon mixture.
RESISTANCE TO: Chemicals resistance, abrasion, oils, grease, rust, corrosion, mildew, chipping and fading.
APPLICATION: Brush, spray or roller. Roll: 1/2" nap lambskin or phenolic core roller. Keep roller wet. Roll in one direction, rewet, then cross roll. Product can be reduced if needed with 6-8 ounces of Xylene per 2 gallon mixture to allow proper flow out performance. Spray: Conventional air gravity feed 59-70 PSI, Tip size .055-.070, Airless 2200-2500 PSI, Tip size .013-.017. For air spray reduce with 25% with reducer (xylene).
POT LIFE: Approximately 3 Hours once 1 gallon of Part A and 1 gallon of Part B are mixed together.
MIXING: Separately mix both Part A and Part B either mechanically or by hand for at least 5 minutes each, making sure that all solid material is mixed thoroughly. Then combine 1 gallon of Part A and 1 gallon of Part B together and mix mechanically or by hand for at least 5 minutes. Allow material to sit and induct for 5-7 minutes and then begin applying the coating
CLEAN UP: Xylene for equipment.
Epoxy Ultra is a 2 Part Commercial Strength Epoxy Coating that is designed for all applications of concrete, steel, wood and masonry. Formulated especially as a heavy duty protective and decorative coating to withstand high traffic, chemicals, oils, and extreme weather conditions. It is a high solids epoxy resin, rust inhibitive protective coating designed for new or previously painted structural steel, rolled steel, metal and all types of wood and concrete surfaces. Special processed chemical ingredients protect substrates against rust, rotting, corrosion, mildew and chipping and fading.
PACKAGE: 2 Gallon Kits - 1 Gallon of Part A + 1 Gallon of Part B