Epoxy Ultra- Commercial Strength 2 Part Epoxy
Epoxy Ultra 2 Part Epoxy paint creates an incredibly durable epoxy bond strong enough to withstand the demands of high traffic areas as well as extreme weather and moisture conditions. It is perfect for hot and cold climates because it does not crack in the cold or bubble in high heat. Its unique combination of advanced resin technology and high quality raw materials produce unequaled performance – even in the harshest environments. The result is an attractive, highly durable finish, that prolongs the life of a surface for up to 20 years.
Epoxy Ultra Industrial Strength Epoxy Coating covers approximately 400 square feet per each 2 Gallon Kit; 2 coats are required for proper application
Epoxy Ultra is a heavy duty residential and industrial strength 2 part epoxy that is a premium high solids protective designed for use on exterior and interior applications such as garage floors, roofs, repair shops, warehouses and more. Epoxy Ultra is designed to withstand high traffic, heavy use and severe exposure to weather and high UV. Epoxy Ultra also protects your surface from chemicals, abrasion, oils, grease, corrosion, mildew, chipping and fading. And is excellent on all types of concrete, steel, wood and asphalt. So if you're looking for the perfect, cost-effective, easy to use product for your commercial or residential project, whether it be a driveway, garage floor, basement or patio for a home project, or a commercial project like a restaurant, retail store, factory or warehouse, then Epoxy Ultra is exactly what you need!
Decorative Paint Flake AdditiveDecorative paint flakes can be added to enhance the look of your surface and are very easy to use. Simply broadcast the paint flakes of your choice on top as you are coating your surface. You can use one color or use your own custom blend of colors to achieve the desired results.
- EXTREMELY DURABLE
- EASY TO USE
- TOUGH AGAINST WEATHERING AND HEAVY USE
- RESISTS CHIPPING, CRACKING, FADING AND PEELING
- ADVANCED EPOXY RESIN TECHNOLOGY INCREASES DURABILITY
- COLORS MAINTAIN THEIR BRILLIANT LOOK FOR MULTIPLE YEARS
- UV PROTECTION FOR ALL SURFACES
- QUICK DRYING TIME
- PROVIDES A MOISTURE PROOF BARRIER
- 20 YEAR WARRANTY
COVERAGE: Approximate coverage at two mils dry is 400 square feet per 2 Gallon Kit, and recommended thickness of 4 mils dry would require 2 full coats. Material losses during mixing and application will vary and must be taken into consideration. Calculate for moderately less coverage on bare, rough or sandblasted surfaces.
To figure out the amount of paint you will require: Length x Width of surface = square footage x 2 (2 coats) divided by 400 square feet = Kits needed.
SUGGESTED USES: Exterior, interior, anywhere a rugged protective coating is needed for your surface.
LIMITATIONS: Do not apply if material, substrate or ambient temperature is below 40 degrees F or above 95 degrees F.
FINISH: Glossy. If additional grit is desired, silica sand can be applied to the surface as the coating as it is being applied.
VEHICLE TYPE: Epoxy resin.
SOLIDS BY WEIGHT: 90%.
RECOMMENDED DRY FILM: 4.0 mils.
WEIGHT PER GALLON: 12 Lbs. per gallon (varies by color).
VISCOSITY AT 75 DEGREES F (24 DEGREES C): 70-80 KU
AVERAGE DRY TIME AT 75 DEGREES F: Dries to touch in 24 hours. Lower temperatures & higher humidity will slow down dry times.
RECOMMENDED REDUCER: If desired material can be thinned using 6-8 ounces of Xylene per 2 gallon mixture
RESISTANCE TO: Chemicals resistance, abrasion, oils, grease, rust, corrosion, mildew, chipping and fading.
SURFACE PREPARATION: Concrete surfaces must be cleaned using a solution of 50% muriatic acid mixed with 50% water. After surface has been rinsed, follow up with a mixture of TSP powder (Tri Sodium Phosphate) and water. Rinse thoroughly and allow surface to dry for 24 hours.
NOTE: If you are coating steel or wood then skip the first step and only clean the area thoroughly with TSP and water and allow to dry for 24 Hours.
APPLICATION: Brush, spray or roller. Recommended application is roll on method.
Rollers: 1/2" lambskin, mohair or phenolic core roller. Keep roller wet. Roll in one direction, rewet, then cross roll. If necessary, product can be reduced as needed with Xylene for easier rollout performance.
Spray: Conventional air gravity feed 59-70 PSI, Tip size .055-.070, Airless 2200-2500 PSI, Tip size .013-.017. Product can be reduced with xylene for proper flow out and performance. For air spray reduce with 25% with enamel reducer (xylene).
After applying 1st coat wait a minimum of 24 hours before applying second coat. 2 Coats are highly recommended for optimal product performance, durability and lifespan.
POT LIFE: Approximately 3 hours once 1 gallon of Part A and 1 gallon of part B are mixed together. Higher temperatures and humidity can shorten pot life.
MIXING: Separately mix both Part A and Part B either mechanically or by hand for at least 5 minutes each, making sure that all solid material is mixed thoroughly. Then combine 1 gallon of Part A and 1 Gallon of Part B together and mix mechanically or by hand for at least 5 minutes. Allow combined material to sit and induct for 5-7 minutes and then begin applying the coating. Only mix the amount of material you expect to use within a 3 hour time frame.
CLEAN UP: Xylene for equipment.
Epoxy Ultra is a 2 part epoxy commercial strength epoxy coating that is designed for all applications of concrete, steel, wood and masonry. Formulated especially as a heavy duty protective and decorative coating to withstand high traffic, chemicals, oils and extreme weather conditions. It is a high solids epoxy resin, rust inhibitive protective coating designed for new or previously painted structural steel, rolled steel, metal and all types of wood and concrete surfaces. Special processed chemical ingredients protect metal and wood against rust, rotting, corrosion, mildew and chipping and fading.
PACKAGE: 2 Gallon Kits - 1 Gallon Part A + 1 Gallon Part B