Item #
7021
Price
$354.95
Sale Price
$269.95
You Save
24%
Options
supremepaintsandcoatings

Epoxy Zenith - 2 Part Epoxy Floor Coating

 

  • INDUSTRIAL GRADE - EPOXY FLOOR COATING
  • HIGHEST QUALITY 1:1 MIX RATIO AVAILABLE
  • ADVANCED EPOXY RESIN TECHNOLOGY INCREASES DURABILITY
  • TOUGH AGAINST WEATHERING AND HEAVY USE
  • IDEAL FOR FACTORIES, WAREHOUSES, SHOPS, GARAGES AND MORE
  • MAXIMUM PROTECTION AGAINST CHEMICALS, OIL, GREASE AND CORROSION



Epoxy Zenith is our highest solids, industrial grade floor epoxy that was developed specifically for commercial, residential and industrial applications. It is designed to withstand high traffic and heavy use and will leave your surface with an extremely durable, attractive and professional looking finish. Epoxy Zenith is more than just a paint. Its unique synthesis of high quality raw materials combined with an advanced resin technology produce an unequaled performance, even in the harshest environments. It can be used on bare concrete, steel, masonry and wood as well as on surfaces that have been previously painted before. It offers maximum protection against chemicals, oils, grease, corrosion, chipping and fading.

Ideal for use in Manufacturing Facilities, Industrial Plants, Warehouses, Auto Shops, Residential Driveways, Garage Floors, Basements and much more.

At 93% solids Epoxy Zenith does not require the use of a primer before applying it. This is a self priming material that is easy to use. Because of its high solids, along with the quality of ingredients used in its formulation, it creates an incredibly durable bond, yet also has enough flexibility to expand and contract in extreme weather and moisture conditions. It is perfect for hot and cold climates because it does not crack in the cold or bubble in high heat. And with a number of colors to choose from, the result is an attractive, enduring finish that will prolong the life of your surface for many years to come.

When you are looking for a high end, easy to use, cost effective product, whether it be for a an industrial/commercial application or a residential project, Epoxy Zenith is what you need.


2 GALLON KIT INCLUDES - (1 OF GALLON PART A) AND (1 GALLON OF PART B)
 

  • COLORS MAINTAIN THEIR BRILLIANT LOOK FOR MULTIPLE YEARS
  • ADVANCED EPOXY RESIN TECHNOLOGY INCREASES DURABILITY
  • RESISTS CHIPPING, CRACKING, AND PEELING
  • STRONGEST PROTECTION & DURABILITY FOR ALL SURFACES
  • AT 93% SOLIDS IT IS OUR HIGHEST QUALITY FLOOR EPOXY
  • EXCELLENT FOR HIGH TRAFFIC AREAS 
  • 25 YEAR WARRANTY



COVERAGE: Coverage is approximately 400 square feet per 2 gallon kit. 2 full coats are strongly recommended for maximum performance and product life. Material losses during mixing and application will vary and must be taken into consideration. Expect less coverage on rough or porous surfaces.

To calculate the amount of epoxy kits you will require: Multiply length of surface x width of surface = Square Footage. Multiply Square Footage x 2  Then divide that total number by 400 which will equal the number of Epoxy Kits needed for two coats.(remember that this product is sold in a 2 Gallon Kit)

SUGGESTED USES: Manufacturing Facilities, Industrial Plants, Warehouses, Auto Shops, Garage Floors, Basements or anywhere a high end industrial coating is needed.

LIMITATIONS: Do not apply if ambient temperature is below 40 degrees Fahrenheit or above 95 degrees Fahrenheit.

FINISH: Gloss. For a more slip resistant finish on areas such as outdoor steps or ramps, Silica Sand can be broadcast on top of the coating during application to achieve the desired texture.

SOLIDS BY WEIGHT: 93%.

RECOMMENDED DRY FILM: 22-24 mils (With 2 Coats) 

WEIGHT PER GALLON: Approximately 12 Lbs. per gallon (varies by color).

AVERAGE DRY TIME: 24 hours. Second coat can be applied after allowing a minimum of 24 hours of drying time with no sanding or extra prep required. Very low temperatures & higher heat and humidity will slow down drying times.

RECOMMENDED REDUCER: 6-8 ounces of Xylene can be added to each 2 gallon mixture for easier rollout performance. *Only if necessary

RESISTANCE TO: Chemicals, abrasion, oils, grease, rust, corrosion, mildew, chipping and cracking.

SURFACE PREPARATION: Concrete surfaces must first be cleaned using a solution of 50% muriatic acid mixed with 50% water. After surface has been rinsed, follow up with a mixture of TSP powder (Tri-Sodium Phosphate) and water. Rinse the area thoroughly and allow the surface to dry for at least 24 hours.

Note: If you are coating steel or wood then skip the first step and clean the area thoroughly with TSP and water. Then rinse the surface and allow it to dry for at least 24 hours.

APPLICATION: Brush or Roller. Recommended application is roll on method.

ROLLERS: 1/2" nap mohair, lambskin or sheepskin roller. Keep roller wet. Roll in one direction, re-wet, then cross roll.

After applying the first coat wait a minimum of 24 hours before applying the second coat. 2 coats are strongly recommended for optimal product performance, durability and lifespan.

POT LIFE: 3 hours per each 2 gallon mixture.

SHELF LIFE: 12 months

MIXING: Mix both PART A & PART B individually for at least 5 minutes each, either mechanically or by hand, and then mix the combined volumes (1:1 Mix Ratio) for at least 5 minutes. Allow the mixed solution to rest for a maximum of 5-7 minutes and then begin using. Mix only what you expect to use in a 2-3 hour period.

CLEAN UP: Xylene for equipment.

Epoxy Zenith is a self priming, 2 Part Epoxy Coating that is designed for application on concrete, steel, wood and masonry. Formulated specifically as a heavy duty protective and decorative coating designed to withstand severe exposure to weather, chemicals and heavy traffic. Special solvents are added to provide further protection against rust, rotting, corrosion, mildew and chipping and fading.

PACKAGE: 1 Gallon Cans (2 Gallons Per Kit)