{"title":"Marine Topside \u0026 Bottom Paint","description":"","products":[{"product_id":"1-new-england-copper","title":"1. 25% COPPER BOAT\/MARINE BOTTOM PAINT - 1 GALLON","description":"\u003cul\u003e\n\u003cli\u003eFULL SEASON PROTECTION\u003c\/li\u003e\n\u003cli\u003eSELF POLISHING ABLATIVE\u003c\/li\u003e\n\u003cli\u003eEASY BRUSH \u0026amp; ROLL APPLICATION\u003c\/li\u003e\n\u003cli\u003eELIMINATES HEAVY SANDING\u003c\/li\u003e\n\u003cli\u003eAFFORDABLE PROTECTION FOR MODERATE FOULING CONDITIONS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cdiv class=\"align-right\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0402\/7321\/5641\/files\/chart_percentcopper.png?v=1592025289\" alt=\"Available Color Options\"\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMixed with 25% copper, this self-polishing ablative gives full protection in moderate fouling conditions at the very best price on the market today.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSELF POLISHING\u003c\/li\u003e\n\u003cli\u003eFULL SEASON PROTECTION\u003c\/li\u003e\n\u003cli\u003eNO PAINT BUILD UP\u003c\/li\u003e\n\u003cli\u003eNO HEAVY SANDING NEEDED\u003c\/li\u003e\n\u003cli\u003eGOOD PROTECTION FOR MODERATE FOULING CONDITIONS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e Our 25% copper marine bottom paint covers approximately 300 square feet per gallon; 2 coats of this bottom paint is needed for proper application - 3rd coat recommended on the waterline.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTo figure out the amount of paint required:\u003c\/strong\u003e Length x Beam x .85 x 2 (2 coats)= Total \/ 300 feet = Gallons Required\u003cbr\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eFull Season Protection\u003c\/h4\u003e\nThe average boater who goes out for 50-100 hours a year will get 1 full season of anti-fouling protection.\u003cbr\u003e \u003cbr\u003e 25% Copper Boat and Marine Bottom Paint provides antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only. Its ablative co-polymer base renders a smooth finish with durability and abrasion resistance. 25% Copper Boat\/Marine Bottom Paint releases biocide by the constant exposure of new paint film to the water. Our 25% Copper Marine Bottom Paint has universal application over all types of properly prepared marine bottom paints (except aluminum). Our bottom paint can be used on fast fiberglass boats, as well as wood and steel hulls.\n\u003cp\u003e\u003cbr\u003e • Self Polishing Ablative\u003cbr\u003e \u003cbr\u003e • Full Season Protection\u003cbr\u003e \u003cbr\u003e • No Paint Build up\u003cbr\u003e \u003cbr\u003e • Eliminates Heavy Sanding\u003cbr\u003e \u003cbr\u003e • Good Protection for Moderate Fouling Conditions\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSurface Preparation\u003c\/h4\u003e\nSurface must always be clean, dry and properly prepared prior to painting. Failure to do so will lead to eventually blistering and\/or peeling. All sanded surfaces must be wiped clean with a dewaxer to remove sanding residue.\n\u003ch4\u003e\u003c\/h4\u003e\n\u003ch4\u003eGeneral Application\u003c\/h4\u003e\nFor use on boats below the true waterline. Can be brushed or rolled on fiberglass, wood, steel and previously painted surfaces per application systems below. Do not use on aluminum. Apply at least 2 coats for best performance, as the life of the paint is proportional to the number of coats applied.\n\u003ch4\u003e\u003c\/h4\u003e\n\u003ch4\u003eMixing and Thinning\u003c\/h4\u003e\nShake or mix thoroughly and stir continuously while using. Thin when necessary with a reducer.\n\u003ch4\u003e\u003c\/h4\u003e\n\u003ch4\u003eTheoretical Coverage\u003c\/h4\u003e\nDepending on surface conditions, one gallon of bottom paint will usually cover about 300 square feet of surface when brushed or rolled.\n\u003ch4\u003e\u003c\/h4\u003e\n\u003ch4\u003eClean Up\u003c\/h4\u003e\nUse a reducer for cleaning equipment and paint brushes.\n\u003ch4\u003e\u003c\/h4\u003e\n\u003ch4\u003eEstimated Dry Times\u003c\/h4\u003e\nBottom paints are designed for over-coating after an overnight dry. Prior to launching, allow a minimum dry of overnight. If drying conditions are poor, or if paint was applied too thickly, longer periods of drying will be required. Fresh coats of paint must be thoroughly dry before over-coating.\n\u003ch4\u003e\u003c\/h4\u003e\n\u003ch4\u003eYearly Repainting\u003c\/h4\u003e\nScrub bottom clean at haul-out. Repaint only if old paint is sound and tight; if not, remove it by sanding or with paint remover. If old paint is rough, sand it with 100-150 grit sandpaper. Prepare seams, nicks and chips as below. Spotcoat any scuffs with antifoulant. Apply 2 coats of antifoulant.\n\u003ch4\u003e\u003c\/h4\u003e\n\u003ch4\u003eOn Bare Wood\u003c\/h4\u003e\nIf seams are not flush, fill them with seam compound. Dry several days until skin forms. Do not sand. Fill nicks with trowel cement, dry hard, sand, apply antifoulant (reduced 10%) then follow with 2 additional unreduced coats of antifoulant.\n\u003ch4\u003e\u003c\/h4\u003e\n\u003ch4\u003eOn Bare Fiberglass\u003c\/h4\u003e\nDewax by washing with a dewaxer, remove dissolved wax at once with clean paper towels or rags; repeat; sand hard to a dull finish with 80-100 grit sandpaper. Fill any chips with trowel cement, dry hard, sand. Apply 5 coats of our Bottom Protect High Build Epoxy Primer, then apply 2 coats of antifoulant.\n\u003ch4\u003e\u003c\/h4\u003e\n\u003ch4\u003eOn Bare Steel\u003c\/h4\u003e\nSandblast surface to a near white metal; remove blast residue with a broom and airhose. Wipe off with a dewaxer. Do not sand. Fill in any imperfections with fairing compound. Sand smooth and wipe clean. Apply 5 coats of our Bottom Protect High Build Epoxy Primer, then apply 2 coats of antifoulant.\n\u003ch4\u003e\u003c\/h4\u003e\n\u003ch4\u003ePackage\u003c\/h4\u003e\n1 Gallon can\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSee also:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.supremepaintsandcoatings.com\/boat-paint\/2-copper-shield-scx\"\u003e45% Copper Bottom Paint\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.supremepaintsandcoatings.com\/boat-paint\/3-copper-pro-scx\"\u003e67% Copper Bottom Paint\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cu\u003e\u003cem\u003e\u003cstrong\u003eHEAR WHAT SOME OF OUR HAPPY CUSTOMERS HAVE TO SAY:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\"...I have used many other bottom paints over the years but I prefer your 25% Copper Boat\/Marine Bottom Paint to all the others I have used.\"\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e -Tom Parrish\u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e \u003cbr\u003e \"I am a contractor and have used many of your paints and epoxy's. You have helped me many times choosing the right product for the right job. I like being able to talk to a live rep to get the answers I need when I need them.\"\u003cbr\u003e \u003cbr\u003e -Jim Hardin\u003c\/p\u003e","brand":"Supreme Paints And Coatings","offers":[{"title":"Royal Blue","offer_id":34607998337177,"sku":"2101","price":89.95,"currency_code":"USD","in_stock":false},{"title":"Marine Black","offer_id":34607998402713,"sku":"2101","price":89.95,"currency_code":"USD","in_stock":false},{"title":"Admiral Green","offer_id":34607998468249,"sku":"2101","price":89.95,"currency_code":"USD","in_stock":false},{"title":"Regatta Red","offer_id":34607998533785,"sku":"2101","price":89.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0402\/7321\/5641\/products\/Marine_Bottom_Paint_25_percent_copper_can_and_label_for_website.jpg?v=1592042560"},{"product_id":"2-copper-shield-scx","title":"2. 45% COPPER BOAT\/MARINE ANTIFOULING BOTTOM PAINT W\/ SCX - 1 GALLON","description":"\u003cul\u003e\n\u003cli\u003eSELF POLISHING BOOSTED ABLATIVE\u003c\/li\u003e\n\u003cli\u003eADDED SCX - SLIME CONTROL XTRA\u003c\/li\u003e\n\u003cli\u003eMULTI-SEASON USE\u003c\/li\u003e\n\u003cli\u003eELIMINATES HEAVY SANDING\u003c\/li\u003e\n\u003cli\u003eEXTENDED PROTECTION FOR MODERATE FOULING CONDITIONS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cdiv class=\"align-right\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0402\/7321\/5641\/files\/chart_percentcopper.png?v=1592025289\" alt=\"Available Color Options\"\u003e\u003c\/div\u003e\n\u003ch2\u003e\n\u003cstrong\u003e\u003cbr\u003e45% COPPER BOAT\/MARINE BOTTOM PAINT W\/ SCX- 1 GALLON\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cdiv class=\"align-right\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eGiven the highest rating by Powerboat Reports in CT testing - loaded with 45% copper, this multi-season ablative with booster SCX gives tremendous antifouling protection against barnacles, slime, grass \u0026amp; algae.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSELF POLISHING\u003c\/li\u003e\n\u003cli\u003eSLIME CONTROL XTRA\u003c\/li\u003e\n\u003cli\u003eGOOD FOR \u003cu\u003eMULTIPLE SEASONS\u003c\/u\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNO\u003c\/strong\u003e HEAVY SANDING\u003c\/li\u003e\n\u003cli\u003eGREAT PROTECTION FOR MODERATE FOULING CONDITIONS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e Covers approximately 300 square feet per gallon; 2 coats needed for proper application - 3rd coat recommended on the waterline\u003cbr\u003e \u003cbr\u003e To figure out the amount of marine antifouling paint required: Length x Beam x .85 x 2 (2 coats)= Total \/ 300 feet = Gallons Required\u003c\/p\u003e\n\u003ch3\u003eMulti-Season Protection\u003c\/h3\u003e\n\u003cp\u003eThe average boater who goes out on the water for 50-100 hours a year will get anti-fouling protection of 2-3 years\u003cbr\u003e \u003cbr\u003e 45% Copper Boat\/Marine Antifouling Bottom Paint w\/ SCX provides extended antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only. SCX - SLIME CONTROL XTRA - acts like a sunscreen to prevent slime and algae. Its ablative copolymer base renders a smooth finish with durability and abrasion resistance.\u003cbr\u003e \u003cbr\u003e 45% Copper Boat\/Marine Bottom Paint w\/ SCX releases biocide by the constant exposure of new paint film to the water. 45% Copper Boat\/Marine Bottom Paint w\/ SCX has universal application over all types of properly prepared bottom paints (except aluminum). For use on fast fiberglass boats, as well as wood and steel hulls, extended protection is possible, since performance is directly proportional to the amount of paint applied.\u003c\/p\u003e\n\u003ch4\u003eSurface Preparation\u003c\/h4\u003e\n\u003cp\u003eSurface must always be clean, dry and properly prepared prior to painting. Failure to do so will lead to eventually blistering and\/or peeling. All sanded surfaces must be wiped clean with a dewaxer to remove sanding residue.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Application\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor use on boats below the true waterline. Can be brushed or rolled on fiberglass, wood, steel and previously painted surfaces per application systems below. Do not use on aluminum. Apply at least 2 coats for best performance, as the life of the paint is proportional to the number of coats applied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixing and Thinning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShake or mix thoroughly and stir continuously while using. Thin when necessary with Thinner.\u003c\/p\u003e\n\u003ch4\u003eTheoretical Coverage\u003c\/h4\u003e\n\u003cp\u003eDepending on surface conditions, one gallon of bottom paint will usually cover over 300 square feet of surface when brushed or rolled.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse a Thinner for cleaning equipment and paint brushes.\u003c\/p\u003e\n\u003ch4\u003eEstimated Dry Times\u003c\/h4\u003e\n\u003cp\u003eBottom paints are designed for overcoating after an overnight dry. Prior to launching, allow a minimum dry of overnight and a maximum of 60 days. If drying conditions are poor, or if paint was applied too thickly, longer periods of drying will be required. Fresh coats of paint must be thoroughly dry before overcoating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYearly Repainting\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScrub bottom clean at haul-out. Repaint only if old paint is sound and tight; if not, remove it by sanding or with paint remover. If old paint is rough, sand it with 100-150 grit sandpaper. Prepare seams, nicks and chips as below. Spotcoat any scuffs with antifoulant. Apply 2 coats of antifoulant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOn Bare Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf seams are not flush, fill them with seam compound. Dry several days until skin forms. Do not sand. Fill nicks with trowel cement, dry hard, sand, apply antifoulant (reduced 10%) then follow with 2 additional unreduced coats of antifoulant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOn Bare Fiberglass\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDewax by washing with a dewaxer, remove dissolved wax at once with clean paper towels or rags; repeat; sand hard to a dull finish with 80-100 grit sandpaper. Fill any chips with trowel cement, dry hard, sand. Apply 5 coats of our Bottom Protect High Build Epoxy Primer, then apply 2 coats of antifoulant.\u003c\/p\u003e\n\u003ch4\u003eOn Bare Steel\u003c\/h4\u003e\n\u003cp\u003eSandblast surface to a near white metal; remove blast residue with a broom and air hose. Wipe off with a dewaxer. Do not sand. Fill in any imperfections with fairing compound. Sand smooth and wipe clean. Apply 5 coats of our Bottom Protect High Build Epoxy Primer, then apply 2 coats of antifoulant.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003ePACKAGE:\u003c\/h4\u003e\n1 Gallon can\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cb\u003eSee also:\u003c\/b\u003e\u003c\/h4\u003e\n\u003cb\u003e \u003c\/b\u003e\u003cb\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.supremepaintsandcoatings.com\/boat-paint\/1-new-england-copper\"\u003e25% Copper Bottom Paint\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ca href=\"https:\/\/www.supremepaintsandcoatings.com\/boat-paint\/3-copper-pro-scx\"\u003e67% Copper Bottom Paint\u003c\/a\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/b\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cu\u003e\u003cstrong\u003eHEAR WHAT SOME OF OUR HAPPY CUSTOMERS HAVE TO SAY\u003c\/strong\u003e...\u003c\/u\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\"We re-coat the bottom of our sail boat every few seasons. We are very pleased to say your 45% Copper Boat\/Marine Bottom Paint w\/ SCXhas lasted much longer than expected. Your products are superb.\"\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e \u003cstrong\u003e-Jack Easly\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e \"I am a contractor and have used many of your paints and epoxy's. You have helped me many times choosing the right product for the right job. I like being able to talk to a live rep to get the answers I need when I need them.\"\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003e-Jim Hardin\u003c\/strong\u003e\u003c\/p\u003e","brand":"Supreme Paints And Coatings","offers":[{"title":"Royal Blue","offer_id":34654724751513,"sku":"2102","price":199.95,"currency_code":"USD","in_stock":false},{"title":"Marine Black","offer_id":34654724784281,"sku":"2102","price":199.95,"currency_code":"USD","in_stock":false},{"title":"Admiral Green","offer_id":34654724817049,"sku":"2102","price":199.95,"currency_code":"USD","in_stock":false},{"title":"Regatta Red","offer_id":34654724849817,"sku":"2102","price":199.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0402\/7321\/5641\/products\/Marine_bottom_paint_45_percent_copper_label_and_can_for_website.jpg?v=1592031318"},{"product_id":"3-copper-pro-scx","title":"3. 67% COPPER BOAT\/MARINE BOTTOM PAINT W\/ SCX - 1 GALLON","description":"\u003cul\u003e\n\u003cli\u003eABLATIVE COPOLYMER ADVANCED TECHNOLOGY\u003c\/li\u003e\n\u003cli\u003eSELF POLISHING\u003c\/li\u003e\n\u003cli\u003eADDED SCX - SLIME CONTROL EXTRA\u003c\/li\u003e\n\u003cli\u003ePREMIUM PROTECTION FOR MODERATE FOULING CONDITIONS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e  \u003cdiv class=\"align-right\"\u003e\n\u003cimg alt=\"Available Color Options\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0402\/7321\/5641\/files\/chart_percentcopper.png?v=1592025289\" style=\"float: right; display: inline; border: 0; margin: 0 0 10px 20px;\"\u003e\n\u003c\/div\u003e\n\u003ch2\u003e67% Copper Boat\/Marine Bottom Paint w\/ SCX\u003cbr\u003e  \u003c\/h2\u003e\n\u003ch4\u003e\"Since the ratings first came out in 2009, we have been pleased: 67% Copper Boat\/Marine Bottom Paint w\/ SCX is now officially the Best Value AND the Highest Rated bottom paint tested independently by Practical Sailor, March, 2009.\"\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e \u003cem\u003e\"\u003c\/em\u003e67% Copper Boat\/Marine Bottom Paint w\/ SCX\u003cem\u003e was the ONLY product rated \"EXCELLENT\" in the high copper ablative category at both test sites, and beat Interlux Micron Extra, Micron 66, Micron CSC, and beat Pettit Ultima Pro, Ultima SR, and beat Seahawk Biocop TF, Cukote, Cukote Biocide Plus \u0026amp; Islands 77, and West Marine PCA \u0026amp; CPP hands down.\" - March, 2009 - Practical Sailor.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eSELF POLISHING\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003cb\u003eSLIME CONTROL XTRA\u003c\/b\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ePROTECTION OVER MULTIPLE SEASONS!\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eYOU CAN RELAUNCH YOUR BOAT WITHOUT REPAINTING AGAIN!\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eNO HEAVY SANDING NEEDED\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ePROTECTION FROM EXTREME FOULING CONDITIONS\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eABLATIVE CO-POLYMER ADVANCED TECHNOLOGY \u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e Our best marine bottom paint coating - loaded with 67% copper, ablative with SCX - Slime Control Xtra.\u003cbr\u003e \u003cbr\u003e Covers approximately 300 square feet per gallon; 2 coats of the copper bottom paint needed for proper application - 3rd coat recommended on the waterline\u003cbr\u003e \u003cbr\u003e To figure out the amount of paint required: Length x Beam x .85 x 2 (2 coats)= Total \/ 300 feet = Gallons Required\u003cbr\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eMulti-Season Protection\u003c\/h3\u003e\n\u003cp\u003eAn average boater that goes out on the water for 100 to 500 hours a year will get anti-fouling protection of approximately 2-3 years.\u003c\/p\u003e\n\u003cp\u003eOur 67% copper bottom paint with SCX provides extended antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only. SCX - SLIME CONTROL XTRA - acts as a barrier to prevent slime and algae.\u003c\/p\u003e\n\u003cp\u003eIts ablative copolymer base renders a smooth finish with durability and abrasion resistance.\u003cbr\u003e \u003cbr\u003e 67% Copper Boat\/Marine Bottom Paint w\/ SCXreleases biocide by the constant exposure of new paint film to the water. 67% Copper Boat\/Marine Bottom Paint w\/ SCXhas universal application over all types of properly prepared bottom paints (except aluminum). For use on fast fiberglass boats, as well as wood and steel hulls, extended protection is possible, since performance is directly proportional to the amount of paint applied.\u003c\/p\u003e\n\u003ch4\u003eSurface Preparation\u003c\/h4\u003e\nSurface must always be clean, dry and properly prepared prior to painting. Failure to do so will lead to eventually blistering and\/or peeling. All sanded surfaces must be wiped clean with a dewaxer to remove sanding residue.\n\u003ch4\u003eGeneral Application\u003c\/h4\u003e\nFor use on boats below the true waterline. Can be brushed or rolled on fiberglass, wood, steel and previously painted surfaces per application systems below. Do not use on aluminum. Apply at least 2 coats for best performance, as the life of the paint is proportional to the number of coats applied.\n\u003ch4\u003eMixing and Thinning\u003c\/h4\u003e\nShake or mix thoroughly and stir continuously while using. Thin when necessary with a thinner.\n\u003ch4\u003eApproximate Coverage\u003c\/h4\u003e\nDepending on surface conditions, one gallon of bottom paint will usually cover about 300 square feet of surface when brushed or rolled.\n\u003ch4\u003eClean Up\u003c\/h4\u003e\nUse a thinner for cleaning equipment and paint brushes.\n\u003ch4\u003eEstimated Dry Times\u003c\/h4\u003e\nBottom paints are designed for overcoating after an overnight dry. Prior to launching, allow a minimum dry of overnight. If drying conditions are poor, or if paint was applied too thickly, longer periods of drying will be required. Fresh coats of paint must be thoroughly dry before overcoating.\n\u003ch4\u003eYearly Repainting\u003c\/h4\u003e\nScrub bottom clean at haul-out. Repaint only if old paint is sound and tight; if not, remove it by sanding or with paint remover. If old paint is rough, sand it with 100-150 grit sandpaper. Prepare seams, nicks and chips as below. Spotcoat any scuffs with antifoulant. Apply 2 coats of antifoulant.\n\u003ch4\u003eOn Bare Wood\u003c\/h4\u003e\nIf seams are not flush, fill them with seam compound. Dry several days until skin forms. Do not sand. Fill nicks with trowel cement, dry hard, sand, apply antifoulant (reduced 10%) then follow with 2 additional unreduced coats of antifoulant.\n\u003ch4\u003eOn Bare Fiberglass\u003c\/h4\u003e\nDewax by washing with a dewaxer, remove dissolved wax at once with clean paper towels or rags; repeat; sand hard to a dull finish with 80-100 grit sandpaper. Fill any chips with trowel cement, dry hard, sand. Apply 5 coats of 8000A\/8000B Bottom Protect High Build Epoxy Primer, then apply 2 coats of antifoulant.\n\u003ch4\u003eOn Bare Steel\u003c\/h4\u003e\nSandblast surface to a near white metal; remove blast residue with a broom and airhose. Wipe off with a dewaxer. Do not sand. Fill in any imperfections with fairing compound. Sand smooth and wipe clean. Apply 5 coats of our Bottom Protect High Build Epoxy Primer, then apply 2 coats of antifoulant.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003ePACKAGE:\u003c\/strong\u003e 1 Gallon can\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cb\u003eSee also:\u003c\/b\u003e\u003c\/h4\u003e\n\u003cb\u003e \u003c\/b\u003e\u003cb\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.supremepaintsandcoatings.com\/boat-paint\/1-new-england-copper\"\u003e25% Copper Bottom Paint\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ca href=\"https:\/\/www.supremepaintsandcoatings.com\/boat-paint\/2-copper-shield-scx\"\u003e45% Copper Bottom Paint\u003c\/a\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/b\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cu\u003eHEAR WHAT SOME OF OUR HAPPY CUSTOMERS HAVE TO SAY...\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\"I have used alot of other bottom paints on my boats over the years. Your 67% Copper Boat\/Marine Bottom Paint w\/ SCXis far superior and lasts much longer then anything I have used before. Thanks for a top shelf product. It was worth every penny.\"\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e -Capt J Arnold\u003cbr\u003e \u003cbr\u003e \"I am a contractor and have used many of your paints and epoxy's. You have helped me many times choosing the right product for the right job. I like being able to talk to a live rep to get the answers I need when I need them.\"\u003cbr\u003e \u003cbr\u003e -Jim Hardin\u003c\/p\u003e\n\n","brand":"Supreme Paints And Coatings","offers":[{"title":"Royal Blue","offer_id":34654783701145,"sku":"2103","price":249.95,"currency_code":"USD","in_stock":false},{"title":"Marine Black","offer_id":34654783733913,"sku":"2103","price":249.95,"currency_code":"USD","in_stock":false},{"title":"Admiral Green","offer_id":34654783766681,"sku":"2103","price":249.95,"currency_code":"USD","in_stock":false},{"title":"Regatta Red","offer_id":34654783799449,"sku":"2103","price":249.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0402\/7321\/5641\/products\/Marine_Bottom_Paint_67_percent_copper_label_and_can_for_website.jpg?v=1592031722"},{"product_id":"4-bottom-protect-high-build-epoxy-primer-2-part-kit","title":"4. SUPER BOTTOM PROTECT - HIGH BUILD EPOXY PRIMER (2 PART KIT)","description":"\u003cul\u003e\n\u003cli\u003eEXCELLENT 2 PART EPOXY PRIMER TO BE USED UNDER OUR MARINE BOTTOM PRODUCTS\u003c\/li\u003e\n\u003cli\u003eEASY BRUSHING, ROLLING \u0026amp; SPRAY APPLICATION\u003c\/li\u003e\n\u003cli\u003ePREVENTS WATER ABSORPTION AND SURFACE BLISTERING\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003c\/h2\u003e\n\u003ch2 style=\"text-align: center;\"\u003eSUPER BOTTOM PROTECT - HIGH BUILD EPOXY PRIMER (2 PART KIT)\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e \u003cbr\u003e Super Bottom Protect 2 part high build epoxy primer gelcoat blister repair system provides a seamless epoxy coating that creates a high build water barrier that eliminates any direct path for water migration. Super Bottom Protect 2 part high build epoxy primer is a heavy duty 3:1 epoxy paint coating for boats that prevents water absorption and blistering on fiberglass boat hulls.\u003cbr\u003e  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePREVENT WATER ABSORPTION AND BLISTERING\u003c\/li\u003e\n\u003cli\u003eELIMINATED DIRECT PATH FOR WATER MIGRATION\u003c\/li\u003e\n\u003cli\u003eHEAVY DUTY 3:1 EPOXY COATING\u003c\/li\u003e\n\u003cli\u003eEXCELLENT ANTI-CORROSIVE SUBSTRATE PRIMER FOR METALS\u003c\/li\u003e\n\u003cli\u003eFULL MULTI-SEASON PROTECTION\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e 4-5 coats of the marine epoxy primer is recommended for best application for gelcoat blistering protection.\u003cbr\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eTECHNICAL DATA FOR SUPER BOTTOM PROTECT\u003c\/h3\u003e\n\u003cstrong\u003eSUGGESTED USES\u003c\/strong\u003e Prevention and repair of gelcoat blistering\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eCOLORS\u003c\/strong\u003e Super Bottom Protect PART A \/ PART B Gray\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eFINISH:\u003c\/strong\u003e Matte\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eVEHICLE TYPE:\u003c\/strong\u003e Epoxy Resin\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eSOLVENT TYPE:\u003c\/strong\u003e High Flash Naphtha\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eVOC:\u003c\/strong\u003e 330 grams \/ liter\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eSOLIDS BY WEIGHT:\u003c\/strong\u003e 50%\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eWEIGHT PER GALLON:\u003c\/strong\u003e 11 lbs. per gallon\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eRECOMMENDED DRY FILM:\u003c\/strong\u003e 10.0 mils\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eCOVERAGE:\u003c\/strong\u003e Approximate coverage at two mils dry is 400 square feet per gallon, and recommended thickness of 10 mils dry would require 4-5 full coats. Material losses during mixing and application will vary and must be taken into consideration.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eVISCOSITY AT 75°F (24°C):\u003c\/strong\u003e 70-80 KU\n\u003ch4\u003eAVERAGE DRY TIME 75°F (23° C):\u003c\/h4\u003e\nDries to touch in 2 hours. Faster dry times in temperatures over 75° degrees F, and slower dry times in temperatures cooler than 75° degrees F. You can re-coat with Super Bottom Protect marine epoxy primer with self in 2 hours to 48 hours. After 48 hours, you MUST sand with 80 grit sandpaper before re-coating with another coat of Super Bottom Protect Primer. When over-coating with anti-fouling, allow 2 hours minimum to 4 hours maximum. Faster dry times in temperatures over 75° degrees F, and slower dry times in temperatures cooler than 75° degrees F. After 4 hours, you MUST sand with 80 grit sandpaper before application of anti-fouling paint, or apply another coat of Super Bottom Protect Primer and overcoat with the appropriate anti-fouling paint within the 2-4 hour over coat window.\n\u003ch4\u003eVERY IMPORTANT:\u003c\/h4\u003e\nApplication of anti-fouling over Super Bottom Protect Primer marine epoxy primer is critical. Anti-fouling may be applied directly over the marine paint by using the “thumb print” method. Touch the Super Bottom Protect Primer film with your thumb – if the paint does not get on your thumb, but is tacky and you can make a thumb print, you are properly in the “overcoat window.” You can then apply anti-fouling paint. If the paint gets on your thumb, it is too soon to recoat with anti-fouling paint. If you can’t leave a thumb print, you have missed the \"overcoat window\" \u0026amp; MUST sand with 80 grit sandpaper or apply another coat of the marine primer paint and then re-coat as above. For Vinyl anti-fouling overcoat times, contact us directly.\n\u003ch4\u003eWHEN OVER-COATING SUPER BOTTOM PROTECT SEALER:\u003c\/h4\u003e\nApply Super Bottom Protect Sealer per label directions. Dries to touch in 5 hours. After last coat of Super Bottom Protect Sealer, wash surface thoroughly with fresh water, wait 12 hours minimum, sand surface with 80 grit paper, wipe surface with tack cloth, apply first coat of Super Bottom Protect Primer.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eRECOMMENDED REDUCER:\u003c\/strong\u003e Reduce with a reducer as needed for proper flow and performance, 10% maximum.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eRECOMMENDED CLEAN UP:\u003c\/strong\u003e Use a Reducer\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eRECOMMENDED FINISH: \u003c\/strong\u003eAblative anti-foulings\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eSURFACE PREPARATION: BARE FIBERGLASS:\u003c\/strong\u003e Degrease by wiping with a rag soaked in a dewaxer. Sand with 80 grade (grit) paper. Remove sanding residue. Wipe with a dewaxer.\u003cbr\u003e \u003cbr\u003e Over Super Bottom Protect PART A \/ PART B: Wash with soap and water. Rinse with fresh water and allow to dry. Sand with 80 grade (grit) paper. Remove sanding residue. Wipe with a dewaxer.\n\u003ch4\u003eBARE METAL\u003c\/h4\u003e\nSurface should be blasted to bright metal. Remove all blast or sanding residue using a clean air line and sweeping with a clean brush or broom. Vacuum clean for best results. Apply primer within 1 hour of metal preparation. If blasting is not possible (or if more than 2 hours has passed since blasting) sand or grind with coarse emery cloth and apply a dewaxer prior to Super Bottom Protect PART A \/ PART B.\n\u003ch4\u003eAPPLICATION\u003c\/h4\u003e\nApply enough Super Bottom Protect PART A \/ PART B to reach a final Dry Film Thickness of 10mils. This usually takes 4-5 coats but the amount of paint is more important than the number of coats.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eAirless Spray Pressure:\u003c\/strong\u003e 165 bar\/2400 psi Tip Size: 0.44-0.53 mm\/17-21 thou.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eConventional Spray Pressure Pot: Pressure:\u003c\/strong\u003e 3.44-4.47 bar\/50-65 psi (gun pressure); 10-15 psi (pot pressure). Tip Size: 1.5-1.8 mm\/60-70 thou. Siphon Cup: Pressure: 3.44-4.47 bar\/50-65 psi - gun pressure. Tip Size: 1.8-2.2 mm\/70-85 thou.\u003cbr\u003e \u003cbr\u003e Brush Use a natural bristle brush.\u003cbr\u003e \u003cbr\u003e Roller Use a 3\/8” - 1\/2” nap solvent resistant roller.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003ePOT LIFE:\u003c\/strong\u003e 5 hours\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eLIMITATIONS:\u003c\/strong\u003e Do not apply if material, substrate or ambient temperature is below 50F or above 95F. Do not put over 1 part paints.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eSHELF LIFE:\u003c\/strong\u003e Minimum 24 months\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eMIXING:\u003c\/strong\u003e Mix PART A Super Bottom Protect Base and PART B Curing Agent at the specified ratio of 3 parts (whole can) PART A Base and 1 Part (whole quart) PART B Activator. Mix small amounts until application technique is developed.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003ePACKAGE:\u003c\/strong\u003e 1 Gallon Kit (3\/4 gallon PART A Base, 1 quart PART B Activator)\n\u003cp\u003e \u003c\/p\u003e","brand":"Supreme Paints And Coatings","offers":[{"title":"Default Title","offer_id":34654811095193,"sku":"2044","price":99.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0402\/7321\/5641\/products\/Super_Bottom_Protect_Primer_can_and_label_for_website_final.jpg?v=1592031979"},{"product_id":"5-ultra-gloss-premium-marine-topside-silicone-enamel-1-gallon","title":"5. ULTRA GLOSS PREMIUM - MARINE TOPSIDE SILICONE ENAMEL - 1 GALLON","description":"\u003cul\u003e\n\u003cli\u003eADVANCED UV TECHNOLOGY\u003c\/li\u003e\n\u003cli\u003eGREAT FOR CLEANING, AND STAIN RESISTANCE\u003c\/li\u003e\n\u003cli\u003eEASY TO APPLY BY BRISTLE BRUSH AND\/OR ROLLER\u003c\/li\u003e\n\u003cli\u003ePERFECT FOR WATERLINE STRIPING\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cdiv class=\"align-right\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0402\/7321\/5641\/files\/chart_ultragloss.png?v=1592080996\" alt=\"supremepaintsandcoatings\"\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\"\u003eULTRA GLOSS PREMIUM TOPSIDE SILICONE MARINE ENAMEL PAINT\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eSILKY FINISH WHICH IS EASY TO APPLY BY BRUSH, ROLLER OR SPRAY\u003cbr\u003e\u003cbr\u003e\u003cu\u003ePERFECT\u003c\/u\u003e FOR WATERLINE STRIPING\u003cbr\u003e\u003cbr\u003eEach gallon of Ultra Gloss Premium silicone marine enamel paint covers approximately 400 square feet per gallon; 2 coats needed for proper application.\u003cbr\u003e\u003cbr\u003eUltra Gloss Premium is a technically advanced, single component silicone copolomer topside finish that delivers a mirror-like finish. Ultra Gloss Premium enamel paint will last up to 10 times longer than conventional topside finishes. It is incredibly durable, very hard, super high gloss, has exceptional color retention, tremendous durability and is loaded with UV protection. Ultra Gloss Premium marine enamel is fast drying and can be sprayed, brushed or rolled giving a silky smooth finish with excellent handle and flow. This widely used silicone copolymer has tremendous resistance to tough chemicals and cleaning solutions. Our marine enamel paint can be used on wood, fiberglass, aluminum and steel.\u003cbr\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e***20 YEAR WARRANTY***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSUGGESTED USES:\u003c\/strong\u003e Topside, decks, cabin, masts, bilge, waterline, boottop striping, industrial and offshore structures.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLIMITATIONS:\u003c\/strong\u003e Do not apply if material, substrate or ambient temperature is below 50 degrees F or above 95 degrees F.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFINISH:\u003c\/strong\u003e Gloss\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVEHICLE TYPE:\u003c\/strong\u003e Polyurethane alkyd resin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSOLVENT TYPE:\u003c\/strong\u003e High flash naphtha.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVOC:\u003c\/strong\u003e 3.76 lbs.\/ gal. (450 grams\/liter).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSOLIDS BY WEIGHT:\u003c\/strong\u003e 50%.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRECOMMENDED DRY FILM:\u003c\/strong\u003e 4.0 mils.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWEIGHT PER GALLON:\u003c\/strong\u003e 10 Lbs. per gallon (varies by color).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVISCOSITY AT 75 DEGREES F (24 DEGREES C):\u003c\/strong\u003e 70-80 KU\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAVERAGE DRY TIME AT 75 DEGREES F:\u003c\/strong\u003e Dries to touch in 4 hours. Lower temperatures \u0026amp; higher humidity will slow down dry times.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRECOMMENDED REDUCER:\u003c\/strong\u003e None.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRESISTANCE TO:\u003c\/strong\u003e Chemicals resistance, abrasion, oils, grease, rust, corrosion, mildew, chipping and fading.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOVERAGE:\u003c\/strong\u003e Approximate coverage at two mils dry is 400 square feet per gallon, and recommended thickness of 4 mils dry would require 2 full coats. Material losses during mixing and application will vary and must be taken into consideration. Expect less coverage on bare, rough or sandblasted surfaces.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAPPLICATION:\u003c\/strong\u003e Brush or roller. Roll: 1\/2\" nap mohair metal, lambskin roller. Keep roller wet. Roll in one direction, rewet, then cross roll. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePOT LIFE:\u003c\/strong\u003e Not applicable.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSHELF LIFE:\u003c\/strong\u003e Maximum 12 months.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMIXING:\u003c\/strong\u003e Mechanically mix for 10 minutes, making sure that all solid material is mixed thoroughly.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCLEAN UP: \u003c\/strong\u003eWater for equipment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePACKAGE:\u003c\/strong\u003e 1 Gallon can\u003c\/p\u003e","brand":"Supreme Paints And Coatings","offers":[{"title":"White","offer_id":34654827577497,"sku":"4121","price":139.95,"currency_code":"USD","in_stock":true},{"title":"Beige","offer_id":34654827643033,"sku":"4121","price":139.95,"currency_code":"USD","in_stock":true},{"title":"Medium Gray","offer_id":34654827708569,"sku":"4121","price":139.95,"currency_code":"USD","in_stock":true},{"title":"Continental Blue","offer_id":34654827741337,"sku":"4121","price":139.95,"currency_code":"USD","in_stock":true},{"title":"Royal Blue","offer_id":34654827806873,"sku":"4121","price":139.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":34654827872409,"sku":"4121","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0402\/7321\/5641\/products\/Ultra_gloss_premium_-_marine_topside_silicone_enamel_can_and_label_for_website.jpg?v=1592032228"},{"product_id":"6-ultra-gloss-topside-marine-polyurethane-enamel-1-gallon","title":"6. ULTRA GLOSS - TOPSIDE MARINE POLYURETHANE ENAMEL - 1 GALLON","description":"\u003cul\u003e\n\u003cli\u003eTOPSIDE ENAMEL FOR MARINE APPLICATION\u003c\/li\u003e\n\u003cli\u003eGOOD FOR CLEANING TOUGH ABRASIONS\u003c\/li\u003e\n\u003cli\u003eBRUSH \u0026amp; ROLL APPLICATION\u003c\/li\u003e\n\u003cli\u003eRESISTANT TO UV LIGHT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cdiv class=\"align-right\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0402\/7321\/5641\/files\/chart_ultragloss.png?v=1592080996\" alt=\"supremepaintsandcoatings\"\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\"\u003eULTRA GLOSS MARINE TOPSIDE POLYURETHANE ENAMEL\u003c\/h2\u003e\n\u003cp\u003eFOR BRUSHING \u0026amp; ROLLING APPLICATION\u003cbr\u003e\u003cbr\u003e20 YEAR WARRANTY\u003cbr\u003e\u003cbr\u003eEach gallon of Ultra Gloss marine polyurethane paint covers approximately 400 square feet per gallon; 2 coats needed for proper application.\u003cbr\u003e\u003cbr\u003eUltra Gloss is technically an advanced single component topside polyurethane enamel paint giving your boat a hard protective coating for super high gloss, color retention, and long durability. Ultra Gloss is fast drying which when brushed or rolled gives a smooth finish with excellent handle and flow. This widely used topside marine polyurethane enamel has tremendous resistance to tough chemicals, cleaning solutions and ultraviolet light with its advanced ultraviolet technology. This marine polyurethane can be used on wood, fiberglass, aluminum and steel.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSUGGESTED USES:\u003c\/strong\u003e Topside, decks, cabin, masts, bilge, waterline, boottop striping, industrial and offshore structures.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLIMITATIONS: \u003c\/strong\u003eDo not apply if material, substrate or ambient temperature is below 50 degrees F or above 95 degrees F.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFINISH:\u003c\/strong\u003e Gloss\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVEHICLE TYPE: \u003c\/strong\u003ePolyurethane alkyd resin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSOLVENT TYPE:\u003c\/strong\u003e High flash naphtha.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVOC: \u003c\/strong\u003e3.76 lbs.\/ gal. (450 grams\/liter).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSOLIDS BY WEIGHT:\u003c\/strong\u003e 50%.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRECOMMENDED DRY FILM:\u003c\/strong\u003e 4.0 mils.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWEIGHT PER GALLON:\u003c\/strong\u003e 10 Lbs. per gallon (varies by color).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVISCOSITY AT 75 DEGREES F (24 DEGREES C):\u003c\/strong\u003e 70-80 KU\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAVERAGE DRY TIME AT 75 DEGREES F:\u003c\/strong\u003e Dries to touch in 4 hours. Lower temperatures \u0026amp; higher humidity will slow down dry times.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRECOMMENDED REDUCER:\u003c\/strong\u003e None.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRESISTANCE TO:\u003c\/strong\u003e Chemicals resistance, abrasion, oils, grease, rust, corrosion, mildew, chipping and fading.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOVERAGE:\u003c\/strong\u003e Approximate coverage at two mils dry is 300-400 square feet per gallon, and recommended thickness of 4 mils dry would require 2 full coats. Material losses during mixing and application will vary and must be taken into consideration. Expect less coverage on bare, rough or sandblasted surfaces.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAPPLICATION:\u003c\/strong\u003e Brush or roller. Roll: 1\/2\" nap mohair metal, lambskin, phenolic core roller. Keep roller wet. Roll in one direction, rewet, then cross roll. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePOT LIFE:\u003c\/strong\u003e Not applicable.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSHELF LIFE:\u003c\/strong\u003e Maximum 12 months.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMIXING:\u003c\/strong\u003e Mechanically mix for 10 minutes, making sure that all solid material is mixed thoroughly.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCLEAN UP:\u003c\/strong\u003e Water for equipment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePACKAGE:\u003c\/strong\u003e 1 Gallon can\u003c\/p\u003e","brand":"Supreme Paints And Coatings","offers":[{"title":"White","offer_id":34654918639769,"sku":"4101","price":89.95,"currency_code":"USD","in_stock":true},{"title":"Beige","offer_id":34654918672537,"sku":"4101","price":89.95,"currency_code":"USD","in_stock":true},{"title":"Medium Gray","offer_id":34654918705305,"sku":"4101","price":89.95,"currency_code":"USD","in_stock":true},{"title":"Continental Blue","offer_id":34654918738073,"sku":"4101","price":89.95,"currency_code":"USD","in_stock":true},{"title":"Royal Blue","offer_id":34654918770841,"sku":"4101","price":89.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":34654918803609,"sku":"4101","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0402\/7321\/5641\/products\/Ultra_Gloss_-_Marine_topside_polyurethane_enamel_can_and_label_for_website.jpg?v=1592032951"}],"url":"https:\/\/supremepaintsandcoatings.com\/collections\/boat-paint.oembed?page=2","provider":"Supreme Paints And Coatings ","version":"1.0","type":"link"}